 |
|||
 |
|||
|
|||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
VCC-G20 Series |
Features
 | 29 mm Cubic Shape |
| High Definition |
| High Frame Rate |
| C-mount |
| Analog Output |
| External Trigger Shutter |
| Partial Scan Function |
Specifications
VCC- G20U20A |
VCC- G20S20A |
VCC- G20X30T1 |
VCC- G20V30A |
|||
| Standard | UXGA | SXGA | XGA | VGA | ||
| Image Sensor | 1/1.8 inch CCD | 1/2 inch CCD | 1/3 inch CCD | 1/3 inch CCD | ||
| Power Consumption | 1.9 W | 1.8 W | 2.0 W | 1.6 W | ||
| Power Supply Input Voltage | +12 VDC ± 10% | |||||
| Environmental Conditions | Temperature 0 to +40°C Humidity 20 to 80% | |||||
| Mass | Approx. 44g | |||||
| Lens Mount | C-mount | |||||
| Optical Axis Precision | Image Center: +/- 0.1 mm and less | |||||
| Video Signal Output | VS Output 1 Vp-p (Sync Negative) | |||||
| Number of Effective Pixels | 1628 (H) x 1236 (V) | 1392 (H) x 1040 (V) | 1034 (H) x 779 (V) | 659 (H) x 494 (V) | ||
| Horizontal Scanning Frequency | 18.75 kHz | 16 kHz | 23.622 kHz | 31.468 kHz | ||
| Pixel Frequency | 36 MHz | 28.636 MHz | 30 MHz | 24.545 MHz | ||
| Pixel Size | 4.4 x 4.4 (µm) | 4.65 x 4.65 (µm) | 4.65 x 4.65 (µm) | 7.4 x 7.4 (µm) | ||
| Minimum Object Illumination | F1.4 1 lx | F1.4 1 lx | F1.4 2 lx | F1.4 1.5 lx | ||
| Sensitivity | F8 400 lx | F8 400 lx | F5.6 400 lx | F5.6 400 lx | ||
| Standard Illumination Color Temperature | 3200°K | |||||
| Gain Switching | MANUAL 0 dB to + 12 dB | |||||
| Electronic Shutter | OFF to 1/10000 s |
OFF to 1/20000 s (60 fps Mode) |
||||
| Sync Method | Internal Synchronization; External Synchronization HD / VD | |||||
| External Trigger | Fixed Shutter Exposure / Pulse Width Exposure | |||||
| Partial Scan | 1/2, 1/4, 1/6 SCAN | |||||
| Other Functions | Binning Function | Binning Function / Monitoring Function | 2:1 Interlace Mode | |||
| Gamma Correction | OFF Fixation (Optional 0.45) | |||||
| Communication Interface | - | |||||
| External Dimensions | 29 mm x 29 mm x 29 mm (except Projection) | |||||
Important Note about the Power Supply and Repair
Power supply of some products is adapted to Japanese 100V specifications. In case of using it outside of Japan, please be sure to use a voltage converter for each country/area.Also, when you need to repair the products purchased from Pulse Denshi, please send them back to us so we can offer repair cost estimates. Your local service center may not accept such repair.
Company and product names mentioned in this website are trademarks of their respective owners.
All information and specifications are subject to change without notice.
All rights reserved. No part of this website may be reproduced.
All information and specifications are subject to change without notice.
All rights reserved. No part of this website may be reproduced.
 |